[at-l] USB ports

[jbryankramer at msn.com (J Bryan Kramer)]

Did you install any software for your camera, I assume from HP? You probably
installed USB drivers then. Of course you could have SE and just not know
it. The starting splash screen says SE2 IIRC.

I never got the camera software to work on either of my digital cameras,
assuming you have a removable compact flash or other memory I always found
getting a card reader and using that to handle files on the camera memory
was much easier and reliable.

Bryan

 Lex et Libertas -- Semper Vigilo, Paratus, et Fidelis!


>
> J Bryan Kramer wrote:
>
> >The short answer is nowhere since Win98 does not support USB
> >
> > Win98SE does support USB the only possible place that it would
> occur to me
> >to look for USB port configuration is in the device manager in
> the control
> >panel, probably in the system applet but it 's been so long since I used
> >Win98 that I am not sure about that. What do you want to
> configure anyway,
> >there aren't any settings that I know of.
> >
> I'm trying to get it so that I can 'upload' from my harddrive to my
> camera (remember that one from a few months ago?). The folk at HP told
> me that I need to make my camera appear to be a removable disk drive. In
> order to do so, I need to change the USB config. to disk drive mode.
> (and, I assume that since I have USB ports, and USE them, that Win98
> does support USB.)
>
>
> _______________________________________________
> at-l mailing list
> at-l@backcountry.net
> http://mailman.hack.net/mailman/listinfo/at-l